Honeywell Analytics Sensepoint XCD RFD Transmitter with LM25, 3/4 in. NPT Entry, Aluminum – SPXCDULNRFD
SPXCDULNRFD XCD RFD Transmitter with LM25, 3/4 in. NPT Entry, Aluminum by Honeywell Analytics
Sensepoint XCD RFD is your most flexible, practical choice for remote flammable gas monitoring in Class I Division 1 areas.
XCD RFD adds safety, productivity and cost efficiency to an operation by extending intelligent, simplified gas monitoring to hard-to-reach areas. XCD’s inherent flexibility (through its modular product design and remote monitoring options) is stretched further to help make an operation run more smoothly and easily, adding bottom line value on top of state-of-the-art safety benefits.
You can mount the sensor up to 100 feet away from the transmitter, so even the most hard-to-access areas can be monitored and protected. What’s more, XCD RFD tells you at a glance whether your equipment is operating properly and keeping you safe. You get continuous, long-term value by conveying accurate gas readings through a rugged, reliable sensing technology, a hallmark of Honeywell. XCD RFD saves you money over the life of your monitoring system.
High Value Sensing Technology
- Poison-resistant catalytic bead sensors offer reliable, long-lasting sensing life in an explosion-proof assembly
- Low power consumption, reducing cost of ownership
- Accurate detection with fast response
Cost Effective
- Common transmitter platform: monitor full range of flammable gases
- Longer sensor life compared to electrochemical sensors
- Simple operation cuts training costs
- Reduced spares and stock costs
- Non-intrusive, one-man operation reduces maintenance cost
- Optional Modbus adds diagnostic capabilities and advanced intelligence to further reduce costs
| Use | 3-wire, 4-20mA, transmitter with optional Modbus for use with remotely mounted flammable gas sensors 705 and 705HT |
| Electrical | |
| Input Voltage Range | 16 to 32VDC (24VDC nominal) |
| Max Power Consumption | Max 5 Watts. at 24Vdc |
| Current Output | 4-20mA (Source or Sink) ≥0.0<1.0 mA: Fault 4.0 mA to 20.0 mA: Inhibit (during configuration/user settings) 22.0 mA: Maximum over range |
| Terminals | 15 x screw terminals suitable for wire diameter 0.5mm2 to 2.5mm 2 (20AWG to 13AWG) |
| Relays | 3 x 5A@250VAC. Selectable normally open or normally closed (switch) and energized/de-energized (programmable) |
| Communication | RS485, MODBUS RTU |
| Construction | |
| Material | Epoxy painted aluminium alloy or 316 Stainless Steel |
| Weight (approx) | Aluminium Alloy LM25: 4.4lbs 316 Stainless Steel: 11lbs |
| Mounting | Pole or wall mounting |
| Cable Entries | 2 x 3/4″ NPT |
| Sensor Entries | 3/4″ NPT |
